Drywall mold can be unappealing. However, do not panic once you observe this within your premises. Below are the greatest tips you can use to kill, clean, and make sure that the mold does not return again.
The drywall within your shower area is not only intended to offer a low-maintenance environment, but it’s actually can be utilized as a mold incubator. Mold likes to live in moisture. Meaning, mold can usually be seen in places in your home like a bathroom, tub, or shower. Once you can observe mold on your drywall, then make sure that you get rid of it right away. If you can stop it as soon as possible, then you get to save your wall and the amount of effort and time that you rather need should it get severe.
However, if you fail to stop it from overcoming your home, it will gobble up your wall. Moreover, the mold is not one of those aesthetic problems that you can learn living with. It can trigger respiratory diseases and allergies. Hence, if you want to have a healthy home environment, take action to remove it immediately. If you’re unsure how to eliminate mildew and mold from your drywall, here are some tips to help you fix that like a pro:
Hydrogen peroxide
Similar to bleach, hydrogen peroxide can also work well with drywall molds. However, you can put this as your last option since it can potentially harm your paint job. Make sure to just apply a 3% solution and do some spot testing before you fully cover your wall with this. If you are satisfied and ready to keep going, spread it onto the mold and allow it to rest for at least 10 min. before you wipe it down.
Water and vinegar
If you are doing your best to prevent chemicals, then you can try mixing equal parts of vinegar and water that will serve as a cleaning solution. It’ll help in eliminating some mold. However, it just functions on 82% of spores. Meaning, stubborn and settled infestation might not help it improve that much.
Household detergent
Go to your nearest local store and visit the aisle that displays several kinds of mold remover. Most of these removers particularly can work with black mold. Hence, as you purchase an always remember this type of fungus.
Bleach and water
When you think that the mold is still starting, try mixing ¼ of water and ½ cup of bleach to come up with an agent that can help kill mold. Make sure to properly mix it and brush it onto the areas of your drywall that’s affected with mold until it can successfully be removed. After doing that, make sure to remove the remaining moisture by wiping down the surface. Don’t rinse it. Once you leave the bleach on the drywall, it enables in killing the spores that hide in the material.
If you’ve tried all the solutions here and you still cannot resolve this issue, then it’s time tor each out to a reputable drywall contractor Philadelphia PA today.
Recent Comments