Major Reasons Why Your Drywall Gets Damaged

For a lot of property owners, repairing drywall can be stressful. Sure, you don’t really need to fix the damage by yourself, however, you still have to be concerned about it happening again. Here are the major causes why drywall usually gets damaged. 

Damages on drywall are problematic and usually one of the issues that are too complicated to deal with. Moreover, most homeowners are new to these issues so they are not prepared for this. Once you can observe buckling, cracks, or holes in your walls, you have to certainly contact an expert drywall contractor Sacramento to have them checked and fix it right away if necessary. But, we have to know the major factors that may cause your drywall to be damaged. Read on this article to know more about them so that you’ll know what to look out for in the future.


Any sort of holes in walls can be identified as a structural concern. Holes can take place due to a lot of factors like doors that blowing doors open without a stopper before it hits the wall or when furniture bumped hard against the wall. If you can notice holes in your drywall, get it fixed and patched ASAP. 

Termite damage

This is one of the biggest concerns for a lot of property owners. When you can see termite damage, contact an exterminator as soon as possible. You can easily determine if your drywall has termite damage when you can see pinholes, and hear a hollow noise while striking the wall. Moreover, wood damage and damaged paint are some of the signs. 


If your drywall is installed badly, then cracks are more likely to happen and it can usually be seen in ceilings. By the time you can notice some cracks, you really have to call a drywall pro to come and assess the damage and fix it right away. 

Poor fastening

Most of the time, drywalls are installed and connected using joint fastening tape. Eventually, this thick tape can become loose as a result of moisture or age and begin to wrap the drywall that it holds together. If this is the case, it can be very visible and obvious in your walls. Sometimes, it gets apparent that drywall was installed poorly when you can observe popping nails through the wall. When this occurs, it means that drywall nails aren’t actually set in the stud. But make sure to refrain from hammering the popping nail in place. It would be best to just take it out and look for the stud first before you fasten it into place. 

Plumbing leaks

Water damage is among the top causes of broken drywall. When you have older plumbing that’s been poorly set up, you can potentially run into a few big problems over time. Among such problems include water damaged drywall. When you can see some bulging on your drywall, then check it as soon as you can and fix the damaged waterline that might’ve been covered there. Then, you can patch or replace the drywall.

Deal With Drywall Mold Like a Pro

Drywall mold can be unappealing. However, do not panic once you observe this within your premises. Below are the greatest tips you can use to kill, clean, and make sure that the mold does not return again. 

The drywall within your shower area is not only intended to offer a low-maintenance environment, but it’s actually can be utilized as a mold incubator. Mold likes to live in moisture. Meaning, mold can usually be seen in places in your home like a bathroom, tub, or shower. Once you can observe mold on your drywall, then make sure that you get rid of it right away. If you can stop it as soon as possible, then you get to save your wall and the amount of effort and time that you rather need should it get severe.

However, if you fail to stop it from overcoming your home, it will gobble up your wall. Moreover, the mold is not one of those aesthetic problems that you can learn living with. It can trigger respiratory diseases and allergies. Hence, if you want to have a healthy home environment, take action to remove it immediately. If you’re unsure how to eliminate mildew and mold from your drywall, here are some tips to help you fix that like a pro:

Hydrogen peroxide

Similar to bleach, hydrogen peroxide can also work well with drywall molds. However, you can put this as your last option since it can potentially harm your paint job. Make sure to just apply a 3% solution and do some spot testing before you fully cover your wall with this. If you are satisfied and ready to keep going, spread it onto the mold and allow it to rest for at least 10 min. before you wipe it down. 

Water and vinegar

If you are doing your best to prevent chemicals, then you can try mixing equal parts of vinegar and water that will serve as a cleaning solution. It’ll help in eliminating some mold. However, it just functions on 82% of spores. Meaning, stubborn and settled infestation might not help it improve that much. 

Household detergent

Go to your nearest local store and visit the aisle that displays several kinds of mold remover. Most of these removers particularly can work with black mold. Hence, as you purchase an always remember this type of fungus. 

Bleach and water

When you think that the mold is still starting, try mixing ¼ of water and ½ cup of bleach to come up with an agent that can help kill mold. Make sure to properly mix it and brush it onto the areas of your drywall that’s affected with mold until it can successfully be removed. After doing that, make sure to remove the remaining moisture by wiping down the surface. Don’t rinse it. Once you leave the bleach on the drywall, it enables in killing the spores that hide in the material. 

If you’ve tried all the solutions here and you still cannot resolve this issue, then it’s time tor each out to a reputable drywall contractor Philadelphia PA today.